Supply & Export / Import of NDT, PWHT & other Industrial Equipment.

WD series Magnetic Coil WDV-COILS

WD series Magnetic Coil

Description

The Western instruments WD-Series Coils are designed specifically for Magnetic Particle Inspection, and have grown in popularity from the Oil Country Tubular Goods Inspection Industry. Drill Pipe, Couplings and other Drilling Tools are regularly inspected for Transverse Cracks, which are normally found in the last engaged thread. These inspections are often performed in the Field, but are just as common in manufacturing and repair facilities.

There are 5 models available with the ID size as below:

  • •   WDV-8 (8 5/8”/219mm ID)
  • •   WDV-10 (10 ¾”/273mm ID)
  • •   WDV-14 (14”/356mm ID)
  • •   WDV-16 (16”/406mm ID)
  • •   WDV-25 (25”/635mm ID)

WDV-8 ,10, & 14 are available in 115Volt/60Hz and 230Volt/50Hz Models.

WDV-16 and 25 are available in 220 Volt/60Hz and 230Volt/50Hz Models.

Specification

The WDV Power Supplies offer the operator Infinite Variable Control on the DC Output of the Coil. All WD-Series Coils have a DC output greater than 10,000 Amp Turns, meeting the most stringent specifications. WDV-Series Coils have gained a very favorable, Worldwide, reputation for their manual Reversing DC Demagnetization capability. Reversing DC Demag is accomplished by Revising the Polarity Switch, Reducing the Amperage followed by a brief shot, by Energizing the Coil. This Reducing – Reversing step is repeated, until the Field is reduced to a desirable level. The AC Option would be selected if the operator wants to Demag small parts, or must inspect in an active AC Field. WDV-AC Coils typically provide an AC field well over 4000 Amp Turns

Models: All sizes of WDV or WDP Series Coils

Frequency: 50 or 60Hz

Voltage: 115VAC or 230VAC (Nominal)

Size: 8.5”, 10.5”,14”, 16” 25” ID Min.

Current: WDV – 0 to 20 Amps (Model Dependent)

Weight: 23 to 52lbs. (10.5-23.6kg) Dependent on size and model.

Capacity: WDV – 0 to 16,000 Amp-Turns (Model Dependent)

WDP – 10,000 Amp-Turns (min. values)

Standard Voltage is 115 VAC, 230 VAC is optional.

Options: Cast Feet and Removable Power Cord, ID Wear Bars, AC Output, Foot Switch.

Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

Get a quote







    Contact Info