Permanent Magnetic Yokes WM series
Description
The WM models permanent yoke consist of both Hinged Frame and Cable Type configurations, so the inspector’s preference is assured. Permanent Magnet Yokes are a great convenience in Magnetic Particle Inspection, due to their complete portability, as no electricity is required. All WM-Series Yokes utilize Rare Earth Magnet Cartridges specifically manufactured to our high-performance needs. WM-Series Yokes lift over 60 Pounds, and with recharging not being necessary, the minimum lift of 50 pounds (23 Kg) is assured for years.
WM series have 3 different models as below:
- • WM 5 Standard Permanent Magnetic yoke
- • WM 5 LT light weight Permanent magnetic yoke
- • WM 5C cable type permanent Magnetic yoke.
The WM-5 and WM-5LT are Hinged Frame units, equipped with Rotating Contact Feet, which easily permits the inspector to maximize the contact area between the Dual Contact Surfaces on the pole pieces and the workpiece. Both of these units have field replaceable magnet cartridges, in the unlikely event of a failure.
Specifications:
Models: WM-5, WM-5LT and WM-5C
Capacity: All are >50 Pounds (23 Kg)
Field Strength with Tips in Contact:
WM-5 9200 Gauss
WM-5LT 8500 Gauss
WM-5C 10900 Gauss 2mm (0.80”) Air Gap
Field Strength with 2” (50mm) Air Gap:
WM-5 510 Gauss
WM-5LT 380 Gauss
WM-5C 5700 Gauss (SIngle Pole Only)
Pole Spacing:
WM-5 0-14” (0-350mm)
WM-5LT 0-14” (0-350mm)
WM-5C 0-24” (0-610mm)
Weight:
WM-5 5 Pounds (2.3 Kg)
WM-5LT 3 Pounds (1.4 Kg)
WM-5C 2 Pounds (0.9 Kg)
